In manufacturing units, using laser has become a common practice, what with all the concentrated light beams affording better accuracy and precision while machining. While single laser beams used to be the primary choice before, today, almost every industry uses the lasers with dual beam to create products with a much better finish and functionality....

Laser Tools Co., Inc. is the only manufacture of intrinsically safe mining alignment lasers in the United States, their lasers are required to mine coal and other minerals.  Underground room and pillar excavations are laser surveyed and aligned which insures the safety of the miners, the mine structures and mining implements. Technological advances make it...

Most people did not think much of lasers back in the day, but technological advancements resulted in further development for its use and application in various fields. These days, lasers are an essential in mining and construction sites across the globe, and it is also a crucial innovation in the field of medicine. Buying a...

Rock face profiling, geological mapping, and stockpile volume measurements—mining applications like these have been easier and safer, thanks to the rapidly advancing laser technology. This technology had such a far-reaching impact on the mining industry over the years, that the benefits simply outweigh the costs. One of the emerging trends in laser technology is green...

Lasers are shining their light into outer space, and if this tech improvement goes according to plan, it might help NASA and other space agencies explore space and boldly go where no man has ever gone before. The Light to Improved Docking In 2014, the European Space Agency (ESA) managed to complete a new docking...

LASER DOCKING™ SYSTEM FOR TRUCKS & TRAILERS “Green Laser Runway Lights for Freight Terminals and Warehouses” Backing 53’ trailers centered to loading docks is time consuming, dangerous and error prone. Trailer and terminal docks are regularly damaged. Use the GLX series green laser lines to stripe trailer loading lanes. This results in faster and more...

A new Speargun Laser Aiming System designed specifically for blue-water and reef spearfishing will be introduced at this year’s Blue Wild Expo in Fort Lauderdale, Florida. The GRT58DC, built by Little Rock, Arkansas-based Laser Tools Co., includes a bright laser beam that pinpoints the exact point of the spear’s impact. This means more head shots, less bleed-out and more first shot...

Laser Tools Co., Inc. has introduced high power laser line generator modules for various industrial and commercial applications.  This includes Pathway laser lines that replace tape and painted lines on warehouse floors that guide people and forklifts; Laser Docking systems for freight terminals to assist trailer centering to loading docks in adverse weather and low...

Laser Tools Co., Inc. upgraded the venerable L100M MX Laser Precision Level™ that has been the standard laser level since its introduction over 25 years ago.  This new laser system called the Model GLX100M-10 MX Laser Precision Level™ uses 520nm Green Laser Technology including a direct drive laser diode so it can operate on just...

Laser Tools Co., Inc. provides high power laser lines for pathway marking and identification.  These laser lines are used in warehouses, loading docks and freight facilities to create safety zones for personnel and forklift operations. Pathway lasers are available in Red, Green and Blue wavelengths and are available in variable lengths and widths.  These lasers are...

How Do You Line It Up and Lay It Down?   Laser Tools Co., Inc., based in Little Rock Arkansas has Green Laser Technology™ that can produce a green laser beam 30 times brighter in sun light making Solar Panel Installation easier and much more precise. The Model GLX350-10 uses 520 nanometer green laser light...

Laser Tools Co., Inc. has been a leading manufacturer of high precision, laser alignment tools for over two decades in the USA. Each product line is certified for the Mining and Tunneling industry in the United States.  Through their devotion to constantly improve each product line by creating new designs specifically suited for the industries...

Laser Tools Co., Inc. out of Little Rock, Arkansas has exactly what is needed for profiling logs for quarter sawing and determining pith. The new model GLX58SAC-Line is more precise which to the timber/ lumber/ machining industries will provide maximum yield and time savings. The model GLX58SAC-Line features a powerful 30mW of Green Laser Technology™...

Laser Tools Co., Inc., based in Little Rock Arkansas has Green Laser Technology™ that can produce a green laser beam 30 times brighter in sun light making Solar Panel Installation easier and much more precise. The Model GLX350-10 uses 520 nanometer green laser light to project a dot with 1/8” accuracy at a 100’.  When...

New Underwater Laser Colors Laser Tools Co., Inc. has developed new laser wavelengths for their Model SB10 and SB20 Sea Beam™ Laser Scalers.  The new laser colors are Red for minimum biologic awareness, Green for greater brightness in turbid water and Blue for long distance penetration in clear water.  The Sea Beams™ are water proof...

SE-10 Solar Energy Installation System SE-50 Solar Energy Installation System Contact: Joe Wortsmith, Marketing Director, Laser Tools Co, Inc. Laser Tools Co., Inc. has developed two new laser alignment systems for industrial PV Photo-Voltaic installation contractors and commercial installers.  The SE-10 and SE-50 Solar Energy Installation Systems are used to align the support Pylons that hold the mounted solar...

Laser Tools Co., Inc. has developed two new laser alignment systems for industrial PV Photo-Voltaic installation contractors and commercial installers. The SE-10 & SE-50 Solar Energy Installation Systems are used to align the support Pylons that hold the mounted solar panels.  Used to survey and align multi-acre power distribution fields, the leveling adapters hold the green laser that attaches...

Models GLX60AC-1W or GLX60AC-500mW 80 Foot Green Laser Line Laser Tools Co., Inc. has introduced a new family of High-Power Laser emitters used for creating laser lines that help center truck trailers to freight terminal docks, illuminate pathways in warehouses and aisles, create overhead crane exclusion zones and project bright, long distance, green laser lines....

GLX60AC-1W Laser Docking System Laser Tools Co., Inc. has introduced a new family of High-Powered Laser Docking Systems for loading docks and freight terminals.  These new laser projectors are more powerful and produce laser spot lights visible in direct sunlight.  This improves trailer movement, docking, safety and management. How it works:  Lasers are mounted on...

Driving a boat is a lot harder than driving an automobile. The water is a far more unpredictable and unsteady surface compared to concrete roads. In addition, there is the obvious lack of a brake, which only serves to further complicate things. While driving a boat is a difficult task in general, docking is most...

Models GLX60AC-1W or GLX60AC-500mW 80 Foot Green Laser Line Laser Tools Co., Inc. has introduced a new family of High-Power Laser emitters used for creating laser lines that help center truck trailers to freight terminal docks, illuminate pathways in warehouses and aisles, create overhead crane exclusion zones and project bright, long distance, green laser lines....

The SE-10 Solar Energy Installation System is used to install the PV piles and bracketry that physically support solar cell panels and arrays. Installers use the SE-10 Solar Energy Installation System’s laser beam as a reference guide for straight pile alignment and consistent cutoff heights. A new 4X32 Optical Scope and GDT250 retro-reflective target have both been added as...

The Sea Reel™ Automatic Speargun reel is suitable for both Pneumatic and Band style spearguns. The reel is mounted to the speargun using tie wraps or stainless-steel screws provided and the shaft slide is slid over the shaft behind the flopper. Two 8mm I.D. Bushings, a Recoil Spring and a Rivet are provided for assembly....

“One Dot, One Shot”“You can see the laser dot on the fish!” On-target laser dot can reduce your missed shots by more than 50% How It Works: Use with Band, Roller or Pneumatic Spearguns for precise aiming in open water, reef or structure fishing. The Speargun Laser Sight projects a bright laser dot at the...

The first laser invented by Laser Tools Co. in 1992 was the L50.  This was a shirt-pocket sized, single red beam, laser level that used the laser beam to extend the level reference.  The L50 used a first-generation, laser diode that was in itself a derivative of the compact disc and entertainment industry. The first Solid State...

The introduction of the Beam Bender™ in 1993 did this very thing. The AP90C Beam Bender™ is not a new invention. It is a repurposed optical component called a Penta Prism that is normally used on the top of a rotary laser to produce a flat plane of laser light when the laser beam is spun around in a...

Laser Tools Co. uses small laser diodes that produce coherent laser beams that can be focused into a pinpoint or a straight (collimated) laser beam.  This means that the laser beam can be used to project a measuring dot or may be converted to a line to project across the floor of a warehouse or...

Wedge Prisms are optical elements or windows that are internal to the laser tool.  The straight laser beam passes through these wedge prisms on its path out of the laser tool.  A laser beam will pass right through a normal window with parallel sides but a wedge prism has one side ground and polished at an angle. ...

Laser beams used in the construction, commercial, industrial, mining and marine industries are just fancy strings or dots.  It’s the application that uses a laser beam dot or line that’s important. A laser dot is an alignment element between two points that provides a straight line like a string.  The laser line can be used to set a layer of bricks,...

Red laser light was the first visible color that was produced by a solid state, laser diode.  Other colors like green and blue are now available and have different benefits including apparent increases in brightness with the same amount projection power. Color centric functions like safety exclusion zones, improvements in outdoor visibility and use are now...

The human eye is remarkable in its ability to resolve features, detect colors and see detail.  In fact, most humans can resolve details with a resolution of .005” (five thousandths of an inch.)  This is equal to 25% of the width of the black graduation mark on a Lufkin® tape measure tape or 20% of...

Laser Brightness is designed to fit an application and suit the expectations of the people using the laser tool.  This means that Laser Tools makes laser lines and dots that are to be seen by the human eye in order to do some kind of work.  But too much or not enough brightness will diminish the...

Apertures that create round laser dots also create diffractive rings around the laser dot which looks like target bullseyes.  The center of the target bullseye is the resized laser beam.  But these apertures do one other thing that’s necessary.  They block the majority of the laser light so that the center of the laser dot can...

Now how do you sell a Laboratory Laser invention to a construction worker?  Can you put it into a brick and sell it to the layout guy? Each laser tool works in the hands of a specialist looking for a quick and accurate device to measure something.  So, it was decided to make the case...

Laser Tools Co. makes fancy strings and dots…So, what! — It’s the markable application that’s so interesting…That’s what! The Egyptians would have used a laser line to help build the great pyramids instead of making a string, if they had lasers back in the day.  Space X uses blue lasers today to assemble their rocket fuselages.  Tomorrow,...

Laser Tools Co., Inc. has released the GLX60AC‑500mW, a high‑output green pathway laser engineered for long‑range visibility in demanding industrial environments. The AC‑powered module delivers a crisp 500‑milliwatt beam ideal for conveyor guidance, vehicle lanes, outdoor marking, and alignment tasks where green laser line visibility is essential. Built in a rugged aluminum housing with thermal stabilization...

Laser Tools Co., Inc. has introduced a new Green Beam, Laser Tool that includes two laser systems built into one.  The GLX90 Combination Laser System projects a vertical fan beam used to align sheaves and belt transmission systems and a straight beam laser used for extending the level reference.  A rotating turret is provided to...

Laser Tools Co., Inc. offers a range of LED strobe models for a variety of mining applications. Each of their strobe lights flashes bright LED every few seconds, and they are visible for over 100 feet down a dark mine shaft or tunnel. Ensuring Safe Mining Operations The laser tools company says each of their...

Why “Made in the U.S.A.” Matters for Safety There is a perception that a product designed, manufactured, assembled and sold in the U.S. is a better product. Naturally, this is arguable since merchandise, durable goods, food and necessities are available worldwide. This is the “Macro” big picture point of view.  But, if a narrow focus...